Examples
The library ships four examples (also under examples/ in the repo).
Basic scheduler
Non-blocking timers with no network:
#include <Pulsync.h>
void setup() {
pinMode(2, OUTPUT);
Pulsync.setInterval([]() {
digitalWrite(2, !digitalRead(2));
}, 500);
}
void loop() { Pulsync.loop(); } Cloud send
Pulsync.setInterval([]() {
Pulsync.beginPayload();
Pulsync.add("temperature", (float)(analogRead(34) * 0.1f));
Pulsync.add("humidity", (float)(analogRead(35) * 0.05f));
Pulsync.endPayload();
}, 10000); Receive commands
Pulsync.onBool("set_led", [](bool state) {
digitalWrite(2, state ? HIGH : LOW);
}); reboot is built in since library 0.3.4. The device restarts from loop() about one second after the command. A sketch handler is optional and, if you register one, runs first.
Remote config
Pulsync.onConfig("readInterval", [](int value) {
readIntervalMs = value;
}, 5000); SoftAP + local HTTP (library 0.3.5+)
Hold SoftAP for a sketch server on a port other than 80. The config portal still uses port 80 when open and keeps priority for the SSID.
#include <WebServer.h>
WebServer server(8080);
void setup() {
Pulsync.begin("PUL-A7K9X2");
Pulsync.enableAP("MyDevice", "secret"); // open AP if password omitted
server.on("/", []() { server.send(200, "text/plain", "ok"); });
server.begin();
}
void loop() {
Pulsync.loop();
server.handleClient();
}